Instruction Manual
6.0SPECIFICATIONS Sensitivity:
Field of View:
Responsivity: Input voltage:
Current Draw: Temperature Range:
Operating:
Storage:
LEDs:
Relays:
Model
Connections:
Enclosure:
Hazardous area classification:
Dimensions:
Weight:
1 ft. sq. Pan fire on axis @ 80 feet within 5 seconds (using standard fuel) Switch selectable form 20 to 80 feet to a 1 sq. ft. kerosene fire
120 degree cone
UV - 185 to 260 nm, IR - 0.715 to 3.5 microns, Visible - 480 to 560 nm 15 to 32 volts, typically 24 volts
@24 Volts DC: 72 mA normal mode, 82 mA alarm mode
Display switch settings, fault type, fire and verified fire information
Fire and Fault Relays
120 VAC, 1.0 amp @ 24 VDC resistive, normally open and normally closed contacts, latching or
Fire, Fault, Verify and Aux Relays
0.5amp @ 120 VAC, 1.0 amp @ 24 VDC resistive, normally open and normally closed contacts are available.
0 mA - Fault, 4 - mA - Normal Mode, 12 mA - Alarm, 20 mA - Verified Fire Screw terminals, 14 - 22 AGW wire size
NEMA 4X, Explosion Proof
Class I, Div. 1 and 2, Groups B, C, D, Class II and III, Div. 1 and 2, Groups E, F, G
5.4x 4.8 x 3.7 inches (13.7 x 12.2 x 9.4 cm) 3 lbs (1.3 Kg)
7.0 LIMITED WARRANTY
SIERRA MONITOR CORPORATION warrants its products to be free from defects in workmanship or material under normal use and service for two years after date of shipment. SMC will repair or replace with- out charge any equipment found to be defective during the warranty period. Final determination of the nature and responsibility for defective or damaged equipment will be made by SMC personnel.
All warranties hereunder are contingent upon proper use in the application for which the product was intended and do not cover products which have been modified or repaired without SMC approval or which have been sub- jected to accident, improper maintenance, installation or application, or on which original identification marks have been removed or altered. This Limited Warranty also will not apply to interconnecting cables or wires, consumables (ie. calibration gases, batteries, sensors),
nor to any damage resulting from battery leakage.
In all cases SMC’s responsibility and liability under this warranty shall be limited to the cost of the equipment. The purchaser must obtain shipping instructions for the prepaid return of any item under this warranty provi- sion and compliance with such instruction shall be a condition of this warranty.
Except for the express warranty stated above, SMC dis- claims all warranties with regard to the products sold hereunder including all implied warranties of merchant- ability and fitness and the express warranties stated herein are in lieu of all obligations or liabilities on the part of SMC for damages including, but not limited to, conse- quential damages arising out of/or in connection with the use or performance of the product.
Model 3100 Series Flame Detector (11/04) | Page: 11 |
