Sierra Monitor Corporation 3100-01 manual Fire and False Alarm Stimuli Table

Instruction Manual

B.3 Verify/Aux. Relay Configurations

Model #	Verify Relay	Aux. Relay
3100-02	Open Contacts	Closed Contacts
3100-03	Closed Contacts	Open Contacts
3100-04	Open Contacts	Open Contacts
3100-05	Closed Contact	Closed Contacts

B.4 Fault Table

Fault #	Fault Label	Description
1	Lens Test Fault	UV sensors didn’t detect enough UV from the internal UV source.
2	Configuration Fault	SW9 is “ON” or a failed program
3	Calibration Fault	Device is out of calibration
4	Volt. Low	Input Voltage is below 15 VDC
5	Photo. Sensor Fault	IR or Visible sensor failed to detect internal test source.
6	Relay Fault	Relay coil circuit is open.
7	Volt. High	Input Voltage was above 32 VDC
8	Temp. Out of Range	Internal device temperature went below -40° C or above 85° C.

B.5 False Alarm Stimuli Table

FALSE ALARM RESPONSE

This table shows the detectors ability to tolerate both modulated and unmodulated false alarm stimuli.

False Alarms Source	Distance	Unmodulated	Modulated
Resistive Electric Heater 1320 Watt	6 Feet	No Response	No Response
Fluorescent Lights (2) 40 Watt Bulbs	6 Feet	No Response	No Response
Halogen Light 500 Watt	10 Feet	No Response	No Response
Incandescent Light 100 Watt	6 Feet	No Response	No Response
Arc Welder 50 Watt	25 Feet	No Response	No Response
Direct Sunlight	93 million miles	No Response	No Response

B.6 Fire and False Alarm Stimuli Table

Model 3100 detector response to a fire while exposed to a variety of radiant energy sources.

False Alarms	Distance to False	Distance	Response Time to
Source	Alarm Source	to Fire	Fire
Resistive Electric Heater 1320 Watt	6 Feet	6 Feet	Less than 5 sec.
Florescent Lights (2) 40 Watt Bulbs	6 Feet	6 Feet	Less than 5 sec.
Halogen Light 500 Watt	10 Feet	6 Feet	Less than 5 sec.
Incandescent Light 100 Watt	6 Feet	6 Feet	Less than 5 sec.
Arc Welder 50 Watt	25 Feet	6 Feet	Less than 5 sec.
Direct Sunlight	93 million miles	6 Feet	Less than 5 sec.

Model 3100 Series Flame Detector (11/04) Page: 17