5.Insert the driver CD and click Next.

6.Select Search for a better driver ... and click Next.

7.Check CD-ROM drive, uncheck the other boxes, then click Next. Click Next again, then Finish.

8.Click Yes to restart Windows to complete the driver installation.

For Existing Windows 98 Installation

1.Install the board and boot up Windows 98.

2.At the Add New Hardware Wizard, click Next.

3.Select Search for the best driver for your device and click Next.

4.Insert the driver CD, checkCD-ROM drive,uncheck the other boxes, then click Next.

5.Click Next, then Finish.

6.Remove the driver CD and restart Windows to complete the driver installation.

Windows ME Driver Installation

For New Windows ME Installation

1.Install the board and follow Microsoft procedures to install Windows ME accordingly.

2.Once Windows has been installed, right click My Computer, then click Properties. Select Device Manager tab.

3.Double click PCI Mass Storage Controller listed under Other Devices.

4.Select Driver tab, then click Update Driver button.

5.Insert the driver CD, select Automatic search for a better driver (Recommended), then click Next.

6.Accept the selected driver, then click OK.

5

Page 5
Image 5
SIIG 04-0322B manual Windows ME Driver Installation, Select Search for a better driver ... and click Next