No image or Black/White image only
ACheck to make sure that all connection cables between the DVD player and the television (or Video projector) are firmly inserted into the corresponding sockets
BCheck to make sure that the settings in the OSD menu match the connections variant, with which you have connected the DVD player to
the television (or Video projector).
CCheck by means of the televisions (or Video projectors) operating instructions to see if set- tings to the television (or Video projector) may be necessary in order to use the DVD player with the television.
No sound
ACheck to see if the DVD player is possibly
switched to mute (MUTE button).
BCheck to see that all connecting cables bet- ween the DVD player and potentially connec-
ted audio components are firmly plugged into the
CCheck to make sure that the settings in the
OSD menu match the connections variant, with which you have connected the audio compo- nent to the DVD player.
DCheck by means of the televisions operating in- structions to see if settings to the television may be necessary in order to use the DVD player
with the television.
ECheck by means of the operating instructions for a potential connected audio component if settings to it are necessary in order to use it with the DVD player.
Remote control not functioning
ACheck to make sure that the remote control batteries have been inserted into the battery compartment with the correct polarity.
BCheck to see if the remote control batteries
are exhausted and, if necessary, change both batteries.
CMake sure that there are no obstacles located
between the remote control and the DVD player.
DBe situated no more than five meters from the DVD player when using the remote control.
Playback language/ Subtitle language do not correspond to the settings in the OSD menu
The playback language/Subtitle language setting in the OSD menu is not available on the inserted disc.
One or several functions can not be switched on
The selected function may not be available on all
function that is not available the symbol 
will be displayed on the television screen.
None of the buttons on the appliance or on the remote control are functioning/other malfunctions
ASwitch off the DVD player by pressing the POWER button. Wait ten seconds, then press the "Power" button again once to switch the
DVD player back on.
BIf the malfunction is still present: Reset the DVD player to its default settings.
No 4:3 or 16:9 image
ACheck by means of the televisions operating in- structions, which image formats the television has at its disposal.
BCheck to see if the settings in the OSD menu match the available image format of the tele- vision.
Contact one of our service partners in your area if …
•the stated function defect can not be resolved as described or
•other functional defects arise.
For this see chapter 18. "Warranty & Service".
- 29 -
