LAST MEMORY
* * GENERAL SETUP PAGE * *
TV DISPLAY | WIDE | ||
ANGLE MARK | OFF | ||
OSD LANGUAGE | ENG | ||
CLOSED CAPTIONS | OFF | ||
SCREEN SAVER | ON | ||
LAST MEMORY | OFF | ON | |
|
|
| OFF |
SET LAST MEMORY STATE
•Select the setting ON to playback a disc from the previous halted position after removal and
•with the setting OFF disc playback starts from the beginning.
Note:
When the DVD player is switched off the saved position is not retained.
8.2 DIGITAL AUDIO SETUP PAGE
DIGITAL OUTPUT
* * DIGITAL AUDIO SETUP PAGE * *
DIGITAL OUTPUT | RAW |
| OFF |
LPCM OUTPUT | 48 K | RAW | |
|
|
| PCM |
SETUP SPDIF
Select the input DIGITAL OUTPUT to set the SPDIF audio output signal.
OFF:Select OFF when there is to be no digital signal output.
PCM:Select PCM (Pulse Code Modu- lation) when a connection to a digital amplifier/receiver exists. Your DVD player transmits, through the PCM signal, the same audio formats that are ren- dered on the disc. In addition there will be an audio signal out- put via the left/right connection.
RAW:The DVD player outputs the raw data of the Dolby Digital sound (default setting).
* * DIGITAL AUDIO SETUP PAGE * *
DIGITAL OUTPUT | PCM | ||
LPCM OUTPUT | 48 K |
| 48 K |
|
|
| 96 K |
SETUP LPCM
Select the input LPCM OUTPUT to set the sampling frequency for the processing of the raw data.
48 K:Default setting.
96 K:Only for DVDs with the corre- sponding sampling frequency.
Note:
The LPCM OUTPUT function is only available if you have set the SPDIF audio output signal to PCM.
DOLBY DIGITAL SETUP
* * DOLBY DIGITAL SETUP * *
DUAL MONO | STR |
| STEREO |
DYNAMIC |
|
| |
|
|
| |
|
|
| MIX - MONO |
DUAL MONO (1 + 1) SETUP
•Select the input DUAL MONO to set the Dolby Digital output either to STEREO,
* * DOLBY DIGITAL SETUP * *
DUAL MONO | STR |
|
|
|
|
|
|
| FULL |
|
|
|
|
| |||||
DYNAMIC |
|
|
|
|
|
|
|
| 3/4 |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| 1/2 |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| 1/4 |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| OFF |
|
|
|
|
|
|
|
|
| |
DYN. COMPR. OFF
•Select the input DYNAMIC to enable an optimal sound replay with reduced volume.
•In the setting FULL the louder passages will be surpressed and the softer passages will be play- ed back louder.
Note:
This function is only possible when using a digital audio component.
- 14 -
