The HT500LINK system combines the signal processing capa- bilities of the DigiOptic™ Image Processor with the high fidelity reproduction of the DLP™ technology Projector by linking the two units via a fibre optic cable.
The DigiOptic™ Image Processor, which should be ideally located close to the signal sources, supports and processes a wide range of video signals, transmitting them to the Projector by means of a fibre optic link cable.
The large number of inputs available (2 Composite Video inputs, 2
The signal processing capabilities of the Image Processor en- sure optimum reproduction of a broad range of input signals, from interlaced video to high definition and graphics.
Conversion of interlaced video signals to progressive signals by means of prestigious DCDi™ technology produces fluid, natural, images free of flicker and stairstepping artefacts.
Faithful reproduction of signals at higher resolutions (such as high definition video and graphics) occurs without loss of information or reduction of image sharpness thanks to the pro- cessor’s high pixel rate signal acquisition capabilities.
Adaptation of the input signal resolution to the Projector resolu- tion occurs without alterations of image quality, in accordance with an ample choice of aspect ratios, including several de- finable by the user. All image adjustments can be performed with the remote control with the aid of the On Screen Display; alternatively, the unit can be controlled by from a home auto- mation system through the serial port.
Thanks to the new optical system based on three chip DMD™, the HT 500 LINK allows to take advantage from DLP™ techno- logy, the Texas Instruments technology.
Each of the three DMD™ chip is dedicated to the modulation of one of the primary colors coming from the optical prism, the refl ected light, after combination by a second prism, is projected outside using an appropriate lens system.
The technology of the HT 500 LINK allows to obtain images without rainbow effect or any other type of artefact, in order to
enjoy an even more realistic images
The two units are connected via a
Transmission occurs without interference or attenuation over distances of up to 500 m.
Moreover, the flexibility and small size of the cable allow the maximum freedom when installing the system in your home.
SIM2 carries out comprehensive functional testing in order to guarantee the maximum product qua- lity.
For this reason, when you start using the product lamp operating hours may already be at between 30 and 60.
In addition to the regular tests, the Quality Control department performs additional statistical tests at the time of shipment.
In this case the packing may show signs of having been opened, and the accumulated lamp operating hours may be slightly higher than the hours asso- ciated with the standard tests.
DLP and DMD are registered trademarks of Texas Instruments. DCDi is a registered trademark of Faroudja, a division of Genesis Microchip, Inc.
DigiOptic is a registered trademark of SIM 2
HDMI, the HDMI logo and
2
