Sim2 Multimedia HTL40 installation manual Tabletop Installation with Support Base Optional

�������

�

�

Fig.10

TABLETOP INSTALLATION WITH SUPPORT BASE (OPTIONAL)

For tabletop installation of the unit you will need the tabletop support, which is sold separately from the HTL40 LINK system.

For more details on the tabletop support and the various models available contact your nearest dealer.

Fit the screen into the tabletop support, aligning the slots on the bottom of the screen unit with the vertical tabs on the support (Fig.11A). Secure the support to the screen by screwing in the two screws in the rear (Fig.11B).

�

�

Fig.11

With the panel in its vertical position, insert the power cable plug into the socket on the LCD panel (Fig.8).

Caution! Do not supply power to the panel by plugging the power cable into the mains socket outlet until you have finished the installation procedure.

Remove the protective caps from the LCD panel connectors making a mental note of the number markings and then insert the fibre optic cable in accordance with the diagram in Fig.9.

Position the curved rear panel at the back of the display and line up the four holes with the bushes (Fig.12A) fixing the parts together with the flathead screws (Fig.12B).

13