![](/images/new-backgrounds/1279806/27980637x1.webp)
Table 2
|
| ���������������� | ��������� |
������ |
| ��������� | |
|
| ||
|
| ��������� �������� | �������� |
��� |
|
|
|
�������������� |
|
|
|
������� |
|
|
|
�� |
|
|
|
����������������������� |
|
| |
������� |
|
| � |
����� |
|
| � |
����� | ���� | ���������� | � ��������������� |
If the “No optical link” or “Error” signals are active the system will not function; if the “Warning” signal is active the system will operate but it may be unable to read certain input signals correctly.
SWITCHING ON AND OFF FROM STAND BY
Switching on the system (Fig.17):
•from the remote control (keys
•from the screen keypad (keys ▲ and ▼).
Typically, the picture will appear after
0
LIG | RC | I | AUTO |
HT | 2005 |
??
?
�������
Switching off the system (Fig.18):
•from the remote control (key )
•from the screen keypad (key ).
LIG | RC | I | AUTO |
| |||
HT | 2005 |
|
??
?
Fig.18
If you wish to power off the two units completely, wait at least one minute in
If power is disconnected from the Screen unit (e.g. setting the mains power switch to the “O” position or inadvertently unplugging the power cable), to restart the HTL40 LINK system also
If the fibre optic link between the two units is interrupted (e.g. by removing one or more cables) to restore normal system operation switch off the two units by means of the mains power switches, restore the fibre optic connections, and then repeat
Fig.17
Pressing a key from
19