Sim2 Multimedia HTL40 Text Insert, F1-F2 Keys, Source Information, OSD Background

�������

TEXT INSERT

Characters are entered using a specific text input menu (Fig.25). This menu provides the facility to store text strings easily and quickly.

����������������		�����	����	����
		�	�	�
���������������������		���	����	���
		�	�	�
		����	����	����
	�	�	�	�
������
�������	�		�
			�

of the ▲ and ▼ keys on the remote control.

The function performed by the key is confirmed by the appearance of a dot on the corresponding column-row intersection.

The functions available for keys F1 and F2 are described below.

����

��������	�������
�����������
�����������		�� ��
�����������
	�������������
��������������
������������	�����
	������������������
�����������
	����������������

Fig.25

Text input mode is same whether you are editing an existing name or entering a name for the first time. Characters can be inserted in any of the available positions (represented by horizontal lines).

Use the ◀ and ▶ keys to move the cursor left or right respectively. Press the numerical key corresponding to the character (Fig. 26); the first press selects the first character, the second press selects the second character, and so forth.

The available characters are shown in the text insert menu that appears in this input mode.

Once you have entered a character, to enter the next character move the cursor to a position immediately to the right by means of the ▶ key on the remote control and repeat the procedure de- scribed above.

Use the ▲key to switch from upper case to lower case characters. To delete any errors move the cursor to the incorrect character and press the ▼ key.

Once you have terminated the text input procedure confirm your text and save it by pressing the MENU+ key on the remote control. If you want to cancel the changes you have made press the MENU- key.

F1-F2 KEYS

The remote control is equipped with two keys (F1 and F2) which are associated with various different functions.

To consult the available functions select the option F1/F2 KEYS to display a table in which the items on the rows describe the functions that can be assigned to keys F1 and F2, which are represented by the table columns.

Choose the required column using the ◀ and ▶ keys on the remote control; this will enable you to identify one of the two keys F1 or F2; now select the function to assign to the key (F1 or F2) by means

Fig.26

MAGNIFICATION

Selects the electronic zoom function. Use the ◀ and ▶ keys to adjust image magnification. If the key is pressed a second time you will activate PAN mode in which the ▲ and ▼, ◀ and ▶ keys enable you to pan over the magnified image.

BLANK

Switches off the video signal and displays a black page. As soon as the key is pressed an OSD indication lasting a few seconds confirms that the function has been activated. Pressing any further keys on the remote control restores the previous conditions.

COLOUR TEMPERATURE

Successive pressing of the key in question (F1 or F2) makes it possible to select a different colour temperature.

GAMMA CORRECTION

Successive pressing of the key in question (F1 or F2) makes it possible to select from among the available gamma curves.

SOURCE INFORMATION

When active (YES) each time the source is changed information is displayed relative to the signal type. When disabled (NO) no information is displayed relative to the selected source when the source is changed.

OSD BACKGROUND

Determines the type of background for the On Screen Display.

26