Advanced Features

Using the Remote Control (RM –12)

The RM-12 remote control is a unique infra-red, two-way remote through which many of the advanced features of the I-Mix are operated. The RM-12 has a three-step power button which allows the unit to save power when not in use. Because the remote sends and receives information, it is important to aim it at the unit while performing all commands. Note: If the signal is not successfully transmitted, the remote will display an “IR Retry” message. Aim the remote at the unit and the signal will be sent again. The RM –12 is effective from up to 30 feet from the I-Mix unit and it uses four (4) AA alkaline batteries.

Quick Access Mode Play back controls only

Press <power> again

to enter

Full function mode

Entering

Normal Function Mode

Please wait

Processing...

To turn the I-Mix on, press the Power button twice.

If the remote is not used for about 5 minutes, it will go into an energy-saving mode and the display screen will go blank.

Press the Power button once to wake the RM-12. It will enter a quick function mode (shown at left), in which only the basic functions of the IM-120 are available.

Press the power button a second time to restore the RM-12 to its normal function mode. The RM-12 will restore to the active screen.

Press the Power button a third time to turn off the I-Mix.

Take a moment to review the chart below, which illustrates the functions of the power button.

Using the three-step power button

RM-12 status

IM-120

RM-12 POWER

Result

 

status

Button

 

Off

Off

Press POWER once

RM-12 will turn on and enter quick function

 

 

 

mode.

Off

Off

Press POWER twice

IM-120 and RM-12 will turn on.

Off

On

Press POWER once

IM-120 will stay on and RM-12 will enter quick

 

 

 

function mode.

Off

On

Press POWER twice

IM-120 will stay on and RM-12 will enter full

 

 

 

function mode and return to last active menu.

Off

On

Press POWER three

IM-120 and RM-12 will both turn off.

 

 

times

 

On

On

Press POWER once

IM-120 and RM-12 will both turn off.

53

Page 53
Image 53
Sima Products 120 user manual Using the Remote Control RM, Using the three-step power button