Light Guard Installation with Velcro Strips
Please use the following steps to attach the light guard successfully using the Velcro strips.
1.Attach the Velcro strips to all the grommets on the frame rear of the as shown in figure 28.
2.Unroll the black vinyl light guard from the accessory box in the package.
3.Begin to lace each Velcro strip to secure the light guard to the frame by looping the Velcro through the back of the grommet in the screen, and passing the Velcro strip through the hole in the top of the strip.
4.Leave a couple of inches of slack as you attach each Velcro strip the first time around. This will allow you to more easily adjust the screen later once fully attached.
5.Once the light guard is attached to the frame, tighten the Velcro strips.
6.Use the Velcro attachment pads located on the bottom of the light guard and the frame to secure the light guard for
Fig. 28
Fig. 29
Page 13
