Sima Products XL-8, XL-12 user manual Securing the Screen to the Ground

Models: XL-8 XL-12

1 24
Download 24 pages 1.67 Kb
Page 15
Image 15
Securing the Screen to the Ground

Securing the Screen to the Ground

Use the ground stakes & tie down ropes to secure the screen. Attach the tie down ropes to the screen using the 4 attachment points located on the upper portion of the frame. If the ground stakes are unable to be used, apply the rope ties to a secured object such as a sand bag to hold down the screen as shown below. Be sure to use an object of sufficient weight (approx. 25 lbs) to secure the screen. Make sure the weighed object does not have sharp edges that could tear or puncture the screen.

WARNING: KEEP AWAY FROM WATER. DO NOT PLACE OR STORE THIS WHERE THIS UNIT CAN FALL OR BE PULLED INTO WATER. ALWAYS USE GFI OUTLETS FOR THE AIR PUMP AND SPEAKERS IF USED OUTDOORS. KEEP ALL ELECTRICAL PARTS AND EXTENSIONS CORDS DRY. ALWAYS UNPLUG FIRST FROM THE ELECTRICAL OUTLET.

Warning: This screen can withstand winds up to 15mph. higher wind speeds will cause disruption in viewing or the grommets to tear off. Deflate screen in excessively windy or severe storm conditions.

Warning: Always survey the ground before staking the equipment. Electrical hazards may exist underground. Overhead power lines may exist; always look-up and survey the electrical hazards above.

Page 15

Page 15
Image 15
Sima Products XL-8, XL-12 user manual Securing the Screen to the Ground