Speaker Specifications and Drawing - XL-SP-8
1
2
3
4
5
6
7
8
9
10
Model | |
Woofer Size | 8” |
Wattage | 80w |
Frequency Response | |
Dimensions (in.) | 18.1x12.2x10.6 |
Weight (lbs) | 19.8 lbs. |
Microphone Input | YES (1/4”) |
Stereo Input | YES |
Ground Stands Included | NO |
1.MIC LEVEL – Used to adjust the volume of the microphone input.
2.MIC INPUT CONNECTOR – ¼” balanced Input for connecting low impedance microphones to the
3.LINE LEVEL – Used to control the level of the line input.
4.LINE INPUT CONNECTOR - RCA Input for connecting line level signals.
5.TREBLE CONTROL - Controls the high band of the Channel Equalizer, +/- 10 dB at 3.5kHz.
6.LINE OUTPUT – ¼” balanced output connector used to link multiple
7.BASS CONTROL - Controls the low band of the Channel Equalizer, +/- 12 dB at 100Hz.
8.AMP CLIP LED - LED lights when the amp is at maximum and about to clip.
9.VOLTAGE SELECTOR – Set this switch to either 115VAC or 220VAC to match your power source.
10.AC POWER INLET – Connect the supplied standard IEC AC power cable here.
•On / Off Switch with indicator light
•Extra Replacement Fuse included, use only T2A fuse
Page 17