Safety

2

READ AND FOLLOW

SAFETY INSTRUCTIONS!

Carefully read and follow all safety instructions in this manual and on pump.

This is the safety alert symbol. When you see this symbol

on your pump or in this manual, look for one of the fol- lowing signal words and be alert to the potential for personal injury.

warns about hazards that will cause serious per- sonal injury, death or major property damage if ignored.

warns about hazards that can cause serious per- sonal injury, death or major property damage if ignored.

warns about hazards that will or can cause minor personal injury or property damage if ignored.

The word NOTICE indicates special instructions which are important but not related to hazards.

Electrically powered sump pumps normally give many years of trouble-free service when correctly installed, maintained, and used. However, unusual circumstances (interruption of power to the pump, dirt/debris in the sump, flooding that exceeds the pump’s capacity, electrical or mechanical failure in the pump, etc.) may prevent your pump from functioning normally. To pre- vent possible water damage due to flooding, consult your dealer about installing a secondary sump pump, a DC backup sump pump, and/or a high water alarm. See the “Troubleshooting Chart” in this manual for information about common sump pump problems and remedies. For more information, see your dealer or call customer service at 1-800-468-7867.

1.Know the pump application, limitations, and potential hazards. Pump water only with this pump.

2.Disconnect the power before servicing.

3.Release all pressure within the system before servicing any component.

4.Drain all the water from the system before servicing.

5.Secure the discharge line before starting the pump. An unse- cured discharge line will whip, possibly causing personal injury and/or property damage.

6.Check hoses for weak or worn condition before each use, making certain that all connections are secure.

7.Periodically inspect the sump, pump and system compo- nents. Keep free of debris and foreign objects. Perform rou- tine maintenance as required.

8.Provide a means of pressure relief for pumps whose dis- charge line can be shut-off or obstructed.

9.Personal Safety:

a.Wear safety glasses at all times when working with pumps.

b.Keep work area clean, uncluttered and properly lighted – replace all unused tools and equipment.

c.Keep visitors at a safe distance from work area.

d.Make workshop child-proof – with padlocks, master switches, and by removing starter keys.

10.When wiring an electrically driven pump, follow all electri- cal and safety codes that apply.

11.This equipment is only for use on 115 volt and is equipped with an approved 3-conductor cord and 3-prong, grounding- type plug.

Hazardous voltage. Can shock, burn or cause death. To reduce the risk of electric shock, pull the plug before servicing. Pump is supplied with a grounding conductor and grounding-type attachment plug. Be sure it is connected only to a properly grounded grounding-type receptacle.

Where a 2-prong wall receptacle is encountered, it must be replaced with a properly grounded 3-prong receptacle installed in accordance with codes and ordinances that apply.

This pump has not been investigated for use in swimming pool areas.

12.A ground fault circuit interrupter is recommended for use with any electrical appliance submerged in water. Installation and all wiring should be performed by a qualified electrician.

13.Make certain the power source conforms to the requirements of your equipment.

Simer Limited Warranty

SIMER warrants to the original consumer purchaser (“Purchaser”) of its products that they are free

General Terms and Conditions

from defects in material or workmanship.

Purchaser must pay all labor and shipping charges necessary to replace product covered by this

If within twelve (12) months from the date of the original consumer purchase any such product

warranty. This warranty shall not apply to acts of God, nor shall it apply to products which, in the

shall prove to be defective, it shall be repaired or replaced at SIMER’s option, subject to the terms

sole judgement of SIMER, have been subject to negligence, abuse, accident, misapplication, tam-

and conditions set forth below. Your original receipt of purchase is required to determine warran-

pering, alteration; nor due to improper installation, operation, maintenance or storage; nor to other

ty eligibility.

than normal application, use or service, including but not limited to, operational failures caused

Exceptions to the Twelve (12) Month Warranty

by corrosion, rust or other foreign materials in the system, or operation at pressures in excess of

Ninety (90) Day Warranty:

recommended maximums.

Requests for service under this warranty shall be made by returning the defective product to the

If within ninety (90) days from original consumer purchase any Drill Pump or MiniVac Pump shall

Retail outlet or to SIMER as soon as possible after the discovery of any alleged defect. SIMER will

prove to be defective, it shall be replaced, subject to the terms set forth below.

subsequently take corrective action as promptly as reasonably possible. No requests for service

Two (2) Year Warranty:

under this warranty will be accepted if received more than 30 days after the term of the warranty.

This warranty sets forth SIMER’s sole obligation and purchaser’s exclusive remedy for defective

If within two (2) years from original consumer purchase, any 1/3 HP Submersible Sump Pump, or

products.

Models 2330, 2300 or A5500, shall prove to be defective, it shall be repaired or replaced at

SIMER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT

SIMER’s option, subject to the terms and conditions set forth below.

DAMAGES WHATSOEVER.

Three (3) Year Warranty:

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WAR-

If within three (3) years from original consumer purchase any 4” Submersible Well Pump, 1/2 HP

RANTIES. IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WAR-

Submersible Sump Pump, or Booster Pump Model 3075SS shall prove to be defective, it shall be

RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL NOT

repaired or replaced at SIMER’s option, subject to the terms and conditions set forth below.

EXTEND BEYOND THE DURATION OF THE APPLICABLE EXPRESS WARRANTIES PROVIDED

Five (5) Year Warranty:

HEREIN.

Some states do not allow the exclusion or limitation of incidental or consequential damages or lim-

If within five (5) years from original consumer purchase any Pre-Charge water system tank shall

itations on how long an implied warranty lasts, so the above limitations or exclusions may not

prove to be defective, it shall be repaired or replaced at SIMER’s option, subject to the terms and

apply to you. This warranty gives you specific legal rights and you may also have other rights

conditions set forth below.

which vary from state to state.

 

SIMER • 293 Wright Street • Delavan, WI U.S.A. 53115

Phone: 1-800-468-7867 / 1-800-546-7867 • Fax: 1-800-390-5351

EMail: info@simerpumps.com • Web: http://www.simerpumps.com

For parts or assistance, call Simer Customer Service at 1-800-468-7867 /1-800-546-7867

Page 1 Page 3
Page 2
Image 2
Simer Pumps 2955, 2905 owner manual Read and Follow Safety Instructions
Page 1 Page 3

2905, 2955 specifications

Simer Pumps is renowned for its innovative design and reliable performance, particularly evident in its models 2905 and 2955. These pumps are tailored for diverse applications ranging from residential to commercial, highlighting the brand's commitment to versatility and efficiency.

The Simer 2905 is a robust submersible pump designed for clear water applications. It boasts a powerful motor that ensures high flow rates, making it ideal for draining pools, floodwater removal, or managing groundwater levels. This model is equipped with a durable thermoplastic construction that not only enhances its longevity but also makes it lightweight and easy to handle. One of its standout features is the automatic on/off switch, which activates the pump when water levels rise, ensuring hassle-free operation.

On the other hand, the Simer 2955 is designed for more demanding applications, capable of handling not only clear water but also wastewater. This submersible pump features a heavy-duty cast iron construction which provides excellent durability. It includes an advanced vortex impeller design, which allows it to handle solids and debris effectively, making it suitable for sewage and effluent applications. The 2955 also incorporates a float switch for automatic operation and can pump water down to a very low level, maximizing efficiency.

Both models showcase technological inclusions that enhance performance and energy efficiency. They are engineered with thermal overload protection to prevent overheating, ensuring the longevity of the motors. The pumps also feature easy maintenance options, with removable components that facilitate routine checks and part replacements when necessary.

The Simer Pumps 2905 and 2955 are characterized by their user-friendly designs. They come equipped with standard 1-1/2 inch discharge ports, making them compatible with most hoses and fittings. Furthermore, their compact designs allow for easy installation in various settings, whether it be basements, galleries, or while constructing new sites.

In summary, Simer Pumps 2905 and 2955 stand out in the market for their reliable performance, versatile applications, and durable construction. With features designed for both efficiency and user convenience, these pumps are ideal choices for anyone seeking dependable solutions to water management and disposal challenges. The combination of quality materials, innovative technology, and ease of use make them a valuable asset for both home and commercial environments.
Top Page Image Contents