SAFETY INFORMATION
Do not open the camera case.
Any opening of the camera case is explicitly reserved to customer service. An arbitrary opening of the case leads to the expiry of the warranty claims. No liability will be assumed for personal injuries or damages caused by the arbitrary opening of the camera case.
Handle the camera with care.
The Sinar Hy6 is a sensitive, high precision optical instrument. Please handle it with the appropriate care. Avoid any agitation of the instrument and any soiling of the optical surfaces, and observe the advice for the care and the maintenance of the camera.
Do not insert any metal pieces into the electric contacts of the camera, of any accessory parts or into the cable connections. There is the danger of an electric shock or of damage to the camera and its component parts.
In the area of the operational elements at the camera body, the camera is equipped with a magnet. Please observe that magnetic fields may cause damage to watches, data carriers and magnet strips of cards etc. Please make sure not to place these devices nearby the camera.
2.2Advice Concerning the Camera
2.2.1Advice for the Prevention of Injuries
Do not open the camera case and do not disassemble the camera.
There is the danger of an electric shock. If the camera is open due to damage of the casing, do not touch the internal parts. Contact customer service.
To prevent the danger of explosion, do not use the camera nearby easily inflammable liquids or gas.
To prevent injuries to the eyes, do not focus the camera lens onto the sun or extremely hot light sources. In rare cases, the focusing of the camera onto extremely hot light sources can lead to an impairment of your vision capability.
If the camera has been dropped into water, or if the internal parts have got in contact with water, please remove the battery to prevent the danger of an electric shock. Do not use the camera any more. Contact customer service.
If any abnormal behaviour of the camera (e.g. smoke, noise, smell) occurs during operation, do not use the camera any more. Disconnect it from the power supply and / or remove the battery. Contact customer service before you use the camera again. In this way, injuries or damages can be prevented.
3
