Sinar Hy6 manual reflex viewfinder

ASSEMBLY INSTRUCTIONS

5.1.5Use of the 90° Reflex Viewfinder

A 90° reflex viewfinder is optionally

1 2 available from your dealer. To attach the 90° reflex viewfinder to the camera body, place the viewfinder horizontally on the top of the camera, and press it downwards. You will hear a “click” when the viewfinder is locked. Make sure that the viewfinder is locked on both sides!

Fig. 5 / 9 90° reflex viewfinder

The 90° reflex viewfinder is equipped with a shoe mount for an external flash unit 1. Please note that this shoe mount is only mechanical, therefore the flash device also has to be connected to the x-contact at the camera body, Æ chapter 12 “Use of the Flash”. The mechanical shoe mount and the x-contact do not support TTL-flash measurement, and therefore are intended for automatic flash units or manual flash operation.

If you would like to use a TTL-flash device, please use the shoe mount at the camera body, Æ chapter 5.7 “Connection of a flash device” and Æ chapter 13 “Use of the flash”.

The 90° reflex viewfinder is also equipped with a dioptre adjustment wheel. Please turn the adjustment wheel 2 at the eyepiece.

18