![](/images/new-backgrounds/1232424/232424161x1.webp)
MIRROR UP
from the first to the last image capture in the series. The middle shot in the series is the basis shot that is set (image 1).
When the focus of the original image is already close to the stop position of the focus (i.e. the minimum or maximum possible focus of the camera), the focus bracketing cannot be performed in the
13 | Mirror Up |
Using the function “Mirror Up”, the mirror is locked before the shutter is activated. In this way, any agitation of the camera when capturing the image can be avoided.
Press the button Mirror Up B4 at the hand grip to lock the mirror, then press the Release Button B1 to take the image.
By toggling, the mirror is reset to its original position.
Fig. 13 / 1 Mirror Up
The camera internal exposure measurement is not active when the mirror is locked, therefore the exposure value is applied that has been measured immediately before the mirror has been locked up. If the exposure measurement value has been previously saved using the button
70