Sinar Hy6 manual Exposure Setting the ISO-SPEED

EXPOSURE – SETTING THE ISO-SPEED

Exposure Compensation is suitable for special exposure situations where the value internally measured by the camera system would lead to incorrect exposure. Also, difficult image situations (backlight) may require exposure compensation.

Please note: Exposure Compensation is available in all automatic exposure modes. When “Manual exposure” has been selected, exposure compensation is not available.

11.3.6Setting the ISO-speed

The ISO-speed defines the sensitivity of the film material of analogue cameras. It can also be used for digital backs. The light sensitivity determines the required light quantity for the correct exposure of the image.

To open the menu “ISO / PGM”, press the button “Exposure

Compensation” B8 in the functional area “Light metering”.

You can set the ISO-speed in all exposure modes.

Fig. 11 / 13 Exposure compensation / ISO-correction

Use the Front Control Wheel W1 to adjust the ISO-value. When the button is released, the standard display is reset and the changed ISO-value appears in the display.

Fig. 11 / 14 Menu “ISO / PGM”

Please note: Currently, the ISO-value can only be adjusted when a film magazine is used.

61