ASSEMBLY INSTRUCTIONS
On each side of the frame holding the focusing screen, two release pins 1 are
1 1 located.
Pull the two release pins 1 with your fingernails towards the rear side of the camera and lift the frame simultaneously.
Fig. 5 / 27 Focusing screen
Pull the focusing screen out of the metal frame.
Insert the new focusing screen into the metal frame behind two metal brackets on each side of the frame 2.
Reposition the frame with the focusing
2 2 screen into its original position. You will hear a click when the focusing screen is locked.
Fig. 5 / 28 Replacement of the focusing screen
Make sure not to touch the surfaces of the focusing screen, therefore hold the focusing screen at the borders. Store focusing screens not in use in a
27
