(Conventional 12) Disassembly procedures for indoor unit
Operating Procedures / Photos
1. Disassemble the front panel, filter
Front Panel
Push the rotating shaft of front panel outwardly, to make it out of the groove, then can take down the front panel.
Filter
2. Disassemble the guide louver
Bend the guide louver so that the movable lock of guide louver is released to remove the guide louver.
Guide louver
3. Disassemble the front case
Open the 2 screw covers at the front case and screw off 1 screws. Pull out the movable latch at the front case with hand and then pull it back- wards to disassemble the front case.
Screws
