The fan does not run when it is set

to supply air.

The indoor fan motor is burned or breaks or has the heat protector malfunction.

The built-in heat protector of the motor breaks frequently because the motor is abnormal.

Wrong connection

The fan capacitor has open circuit or is damaged.

Replace the fan motor or the defective part.

Replace the fan motor

Make the correction connection based on the circuit drawing.

Replace the fan capacitor of the same type and same specification.

The outdoor fan motor is damaged.

In the cooling and

 

 

 

 

 

heating mode, the

 

 

 

Wrong connection

 

compressor runs,

 

 

 

 

 

 

 

 

 

but the outdoor fan

 

 

 

The outdoor fan capacitor is damaged.

 

does not run.

 

 

 

 

 

 

 

 

 

 

Replace the fan motor

Make the correct connection based on the circuit drawing

Replace the fan capacitor

The compres- sor is too hot and leads to the action of the protector.

The compres- sor is too hot

 

Malfunction of compressor

 

 

 

Replace the compressor

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Breakage of running capacitor of

 

 

 

 

 

 

 

 

 

Replace the capacitor

 

compressor

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The voltage is too low or too high.

 

 

 

Manostat is recommended.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Wrong wire connection

 

 

 

Connect the circuit diagram correctly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use the multimeter to check whether the con-

 

 

The protector itself has malfunction.

 

 

 

tact of the compressor is on when it is not

 

 

 

 

 

 

overheated. If it is not on, then replace the pro-

 

 

 

 

 

 

 

 

 

 

 

tector

 

 

The refrigerant is not enough or is too

 

 

 

Adjust the volume of the refrigerant

 

much.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The capillary is blocked and the tem-

 

 

 

Replace the capillary

 

perature rises.

 

 

 

 

 

 

 

 

 

 

 

and leads to the action of the protector.

The swing fan does not run.

The compressor does not run smoothly or is stuck. The air dis- charge valve is damaged

The protector itself has malfunction.

The torque of the swing motor is not enough

Wrong connection

The controller is damaged(IC2003 is damaged, the swing relay can not close, etc)

Replace the compressor

Replace the protector

First, check whether the connection is wrong. If no, replace the parts

Page 36
Image 36
Sinclair ASH-13AK, ASH-09AK service manual Wrong connection

ASH-09AK, ASH-13AK specifications

The Sinclair ASH-13AK and ASH-09AK are two remarkable electric aircraft developed by Sinclair Aeronautics, exemplifying cutting-edge technologies and contemporary design philosophies within the realm of aviation. Both models are designed to meet the growing demand for eco-friendly flight solutions, paramount in contemporary aviation discussions focused on sustainability and efficiency.

The ASH-13AK is a sleek glider that emphasizes aerodynamic efficiency. It features a wingspan of 13 meters, designed with advanced composite materials that contribute to its lightweight structure while ensuring robustness. The aerodynamic design allows for excellent lift-to-drag ratios, making it highly efficient in its operational capabilities. With its innovative control surfaces, the ASH-13AK enhances maneuverability, enabling pilots to experience heightened responsiveness during flight.

On the other hand, the ASH-09AK, a slightly smaller variant with a wingspan of 9 meters, focuses on agility and versatility. This model is particularly suited for training environments and leisure flying, offering novice pilots an accessible entry into the world of gliding. The ASH-09AK also incorporates state-of-the-art avionics, ensuring that pilots have access to modern navigation and real-time data during their flights.

Both aircraft integrate advanced battery technologies that provide extended flight times and reduce reliance on ground support. The electric propulsion systems utilized by the ASH-13AK and ASH-09AK allow for quieter operation and zero emissions during flight. This not only minimizes the environmental footprint but also enhances the flying experience by allowing for serene, unobtrusive navigation across the skies.

The intuitive cockpit design in both models includes user-friendly interfaces that display critical flight information, making piloting more accessible even for those less experienced. The ergonomic seating and cockpit layout ensure comfort during extended flights, with ample visibility for the pilot to navigate seamlessly.

In summary, the Sinclair ASH-13AK and ASH-09AK are exemplary electric aircraft that showcase modern engineering prowess. Their focus on sustainability, efficiency, and user-friendly technologies demonstrate Sinclair Aeronautics' commitment to advancing the future of aviation, making them noteworthy additions to the electric aircraft market. With continued innovation and development, both models are set to inspire a new generation of aviators seeking eco-conscious flying experiences.