SPOOL PINS
HORIZONTAL SPOOL PIN for normal thread spool
Place thread spool on the pin and secure with a spool cap to ensure smooth flow of thread. If the thread spool has a thread retaining slit, it should be placed to the right.
Select the correct spool pin cap according to the type and diameter of spool being used. The diameter of the spool pin cap should always be larger than that of the spool itself.
VERTICAL SPOOL PIN for large thread spool
Attach the spool pin and place a felt disc over it. Place a spool of thread on the spool pin.
PRESSER FOOT LIFTER
There are three positions for your presser foot.
1.Lower the presser foot to sew.
2.Raise the lifter to the middle position to insert or remove fabric.
3.Lift it to its highest position to change the presser foot or to remove thick fabric.
DARNING PLATE
Use the darning plate when you need to control fabric feeding for button sewing, free motion work and darning by yourself.
Raise needle and presser foot, and position darning plate onto the needle plate with the two pins on the back inserted to the holes of needle plate.
.oo |
| '_2_ | |||
Bobine |
|
|
| ||
Carrete |
|
|
|
|
|
|
| Spool pin | felt discs |
|
|
|
| Rondetle | feutre |
| |
|
| Disco det | pasador | carrete | |
|
|
|
|
| .L |
Vertical | spool | pin |
|
| [1 |
vertical |
|
| J' | ||
Pasador | de carrete vertical |
| |||
|
| Thread | retaining | slot | |
|
| Fente de retenue de fit | |||
_1_ | Ranura | de retenci6n de hito |
1 |
| Spool pin | |
Spool pin cap | Spool | ||
Pasador carrete | |||
Bobine | |||
| |||
Tapa det pasador carrete |
| ||
Carrete |
|
CONVERTING TO FREE=ARM SEWING
Your machine can be used either as a flat- bed or as a
With the extension table in position, it provides a large working surface as a standard
To remove the extension table, hold it firmly with both hands and pull it off to the left as shown. To replace, slide the extension table back into place until it clicks.
With the extension table removed the machine converts into a slim
12