SETTING UP YOUR MACHINE
Be sure to wipe off any surplus oil from needle plate area before using your machine the first time.
POWER LINE CORD/FOOT CONTROL
Connect the plug of the power line cord into the cord socket (1) and your walt outlet (2) as illustrated.
Connect the foot control plug (3) into the machine socket.
NOTE: When foot control is disconnected, the machine wilt not operate.
POWER/LIGHT SWITCH
Your machine wilt not operate until the power/ light switch is turned on. The same switch controls both the power and the light.
When servicing the machine, or changing needles, etc., machine must be disconnected from the power supply.
Set power/tight switch at "OFF"
Mettez l'interrupteur moteuri lumiere sur "OFF".
Poner el Interruptor de comente/ luz de vetocidad en "OFF"
Machine socket
Connecteur de ta machine
Conector de la maquina
Pin
Pasador
cord
Cordon
Cord6n de la linea etectrica
Foot control Rheostat
Control por pedal
Aiways disconneCt the maChJnefiom power
///_ SuPPlY bY removing the p!ug from the wa!!:out!et:
Power/tight | switch "OFF" | Power/tight | switch "ON" |
Interrupteur | moteur/tumiere "OFF" | Interrupteur | moteur/tumiere "ON" |
Interruptor comente/tuz "OFF" | Interruptor comente/tuz "ON" | ||
10
