Sirius Satellite Radio 6.1ch Sirius-Ready A/V Surround Receiver manual S-VIDEOJack, COMPONENT Jack

S-VIDEO Jack

The video signal is separated into luminance (Y) and color (C) signals for the S-VIDEO jack. The S-VIDEO signals enable high-quality color reproduction. If your video component has an S-VIDEO output, we recommend to use it. Connect the S-VIDEO output jack on your video component to the S-VIDEO input jack on this unit.

COMPONENT Jack

Make component video connections to a TV or monitor with component inputs to produce higher quality video images. Use a component video cable or 3 video cords to connect the component video out jacks on the receiver to the monitor.

Video Convert

The receiver converts S-Video input signals to a video output signal. For example, the S-Video input signal can be output to the receiver’s MONITOR OUT VIDEO jack.

Notes:

•Be sure to connect the left and right audio channels properly. Red connectors are for the R (right) channel, and white connectors are for the L (left) channel.

•Be sure to connect the inputs and outputs of the video signals properly.

•If you connect the S-VIDEO or component signal to the S-VIDEO or component jack on this unit, it is not necessary to connect the conventional video signal to the VIDEO (composite) jack. If you use both video inputs, this unit gives priority to the S-VIDEO signal.

•Each type of video jack works independently. Signals input to the VIDEO (composite), S-VIDEO or component jacks are output to the corresponding VIDEO (composite), S-VIDEO, or component jacks, respectively.

•You may need to set up the digital audio output format of your DVD player, or other digital source components. Refer to the instructions of each component connected to the digital input jacks.

18