Sirius Satellite Radio 6.1ch Sirius-Ready A/V Surround Receiver manual AC Power Cord

To display the signal strength, press OSD once.

Connect the SIRIUS home tuner to your receiver using the 8-pin mini DIN cable. Your receiver provides the power to the SIRIUS home tuner through the 8-pin mini DIN cable. You do not need to connect the AC adapter to the Sirius home tuner. However, we recommend using the AC adapter for less noise.

You can use the OPTICAL IN jack to connect an optical cable (not supplied) to receive audio signals from the SIRIUS home tuner. When you use the optical cable, leave the 8-pin mini DIN cable connected and set the input mode to digital by pressing ANALOG/DIGITAL SELECT.

Notes:

•The SIRIUS OPTICAL IN jack is only for the SIRIUS home tuner.

•Before making or changing the connections, switch off the power and disconnect the power cord from the power outlet. Plugging in components should be the last connection you make with your system.

•Do not allow any contact between speaker wires from different terminals.

AC Power Cord

Be sure to connect the power cord to an AC outlet that supplies the correct voltage.

Hold the power plug when plugging or unplugging the power cord.

23