lower than approx. 120 Hz will be output from the subwoofer. If the subwoofer is set to NONE and the front speakers are set to LARGE, then the sound may be output from both the left and right speakers.
Note: For the center, surround, and surround back speakers, select NONE if no speaker is connected. If you select NONE for the SURR B speaker, only
5.1channel modes will be available.
6.Press S or T to change the setting.
7.Press ENTER. The setting is saved in memory.
8.Press T. The next configuration (CENTER SPEAKER) appears on the display.
Repeat Steps 4 to 8 to set other configurations. When all the configurations have been finished, press SET UP (or leave the unit for 5 seconds) to exit the speaker setup mode.
VOLUME
SET UP 
ENTER
TEST TONE 
46
