Installation and Setup
If you are installing the antenna at the roof edge, or hood edge, install the Cable Routing Adapter to direct the antenna cable downward..
Without Cable | With Cable |
Routing Adapter | Routing Adapter |
Installed | Installed |
Cable Routing |
|
Adapter orientation |
|
Place the antenna wire | Slide the Cable Routing |
into the groove of the | Adapter down the antenna wire |
Cable Routing Adapter | and press it into the antenna |
| until it is flush with the bottom |
| of the antenna |
Recommended Antenna Cable Routing
Tuck the antenna cable under the rubber molding around the front windshield to the nearest corner.. Then route the cable out of the windshield molding and into the rubber weather stripping 
16
