Ski-Doo GTX Series manual Engine Oil Change and Oil Filter Replacement, Recommended Engine Coolant

MAINTENANCE PROCEDURES

5.Reinstall dipstick, push in com- pletely.

6.Remove dipstick again and read oil level. It should be between marks.

lmr2007-053-100_a

1.Full

2.Add

3.Operating range

7.Add oil up to have the level between marks as required.

To add oil:

–Unscrew oil cap

–Place a funnel into the opening

–Add the recommended oil to the proper level.

NOTE: Do not overfill.

smo2007-002-005_b

MODELS WITH ENGINE COVER

1. Oil filling cap

smo2007-002-007_b

MODELS WITHOUT AN ENGINE COVER

1. Oil filling cap

NOTE: Every time oil is added in en- gine, the complete procedure ex- plained previously must be done (en- gine restarted, idling for 30 seconds, 30 seconds waiting time and then, rechecking the oil level). Otherwise, you will have a false oil level reading.

8.Properly reinstall oil cap and dip- stick.

Engine Oil Change and Oil Filter Replacement

The oil change and filter replacement should be performed by an authorized Sea-Doo dealer.

Engine Coolant

Recommended Engine Coolant

Always use ethylene-glycol antifreeze containing corrosion inhibitors specifi- cally for internal combustion aluminum engines.

NOTE: When available, it is recom- mended to use biodegradable an- tifreeze compatible with internal com- bustion aluminum engines. This will contribute to protect the environment.

Cooling system must be filled with wa- ter and antifreeze solution (50% dem- ineralized water, 50% antifreeze).

BRP sells premixed coolant with freez- ing protection up to -37°C (-35°F) (P/N 293 600 038).

To prevent antifreeze deterioration, al- ways use the same brand. Never mix different brands unless cooling system is completely flushed and refilled. Re- fer to an authorized Sea-Doo dealer.

Engine Coolant Level

WARNING

Check coolant level with engine cold. Never add coolant in cooling system when engine is hot.

88______________