Ski-Doo GTI Series, GTX Series, RXP Series manual High Performance VTS, RXP-X, RXT-X and Wake Models

CONTROLS/INSTRUMENTS/EQUIPMENTS

smo2008-001-030_a

INFORMATION CENTER GAUGE — VTS POSITION INDICATOR

1.Position indicator

2.Bow up

3.Bow down

4.Operating range (RXP models)

5.Operating range (other models)

High Performance VTS

RXP-X, RXT-X and WAKE Models

Provides pre-set positions for quick settings when adjusting watercraft trim.

Two different trim position can be recorded, one for each button.

The VTS system will compare trim set- tings recorded, the highest trim setting will be assigned to the upper button (bow up), the lowest to the lower but- ton (bow down).

If both trim positions are identical, both buttons will have the same trim set- tings.

Recording Trim Positions

1.Push both VTS buttons simultane- ously.

smo2008-001-011_c

TO RECORD

2.PRESET 1 will be displayed in infor- mation center gauge to indicate that it is ready to record trim position.

smo2008-001-032_a

PRESET 1 — READY TO RECORD

3.Adjust trim to the desired position using VTS buttons.

4.Push both VTS buttons again simul- taneously to record trim position.

5.Then, PRESET 2 will be displayed in information center gauge to indicate that it is ready to record another trim position.

smo2008-001-032_b

PRESET 2 — READY TO RECORD

_______________ 45