Skuttle Indoor Air Quality Products 60-2, F60-2 warranty Option D Internal Side Mount

Option D: Internal Side Mount

Figure 4 - Internal Side Mount

Option D requires a transition to be made and usually needs duct rein- forcement to hold the humidifier securely in place (see Figure 4).

DANGER: Wear safety glasses when cutting or drilling. Do not cut into any air conditioning or electrical accessories during installation.

Electrocution is possible if you come in contact with a live electrical wire; blindness can occur if Freon contacts your eyes.

To install:

1.Construct a transition and attach it to to the plenum.

2.Attach the humidifier mounting template to the location selected on the side of the transition.

3.Use a 7/64" drill bit to drill eleven (11) holes, as indicated on the template. Drill a hole in the center of the shaded area of the template and remove the area between the solid bold line using tin snips.

CAUTION: Follow the dotted line carefully.

4.Remove the template.

5.Attach the L-shaped bracket with six (6) holes to the top/front of the humidifier, so that the vertical wall is toward the reservoir.

16