10.Check the two compression fittings – one at the saddle valve, the other at the float valve. Stop any leakage by tightening the fitting.
11.Connect the humidifier's overflow provision to a suitable waste drain.
•A standard garden hose or a 3/8" N.P.T. male fitting (not supplied) can be attached to the overflow fitting.
•Provide support at many points along the hose to prevent kinks – particularly near any heat source.
12.Turn the water to the humidifier on. The float valve should shut the water off at
13.Make sure the humidifier is plugged into a powered outlet.
14.Adjust the humidistat according to instructions provided with the humidistat.
NOTE: See “How To Maintain the Skuttle Steam Humidifier” (next section) for additional information.
24
