Manuals / Skuttle Indoor Air Quality Products / Household Appliance / Humidifier

Skuttle Indoor Air Quality Products 60-2, F60-2 warranty Connecting to a Power Source

Models: 60-2, F60-2

1 40

Download 40 pages 55.82 Kb

Page 18

Connecting to a Power Source

Connecting to a Power Source

When selecting a location for mounting the humidifier, make sure that electrical connections can be made without the use of an extension cord.

CAUTION: The electrical receptacle must be rated at the correct voltage and amperage, or hazardous conditions could result.

•Models 60-1 and F60-1require a receptacle rated at 120 VAC, 15 amperes (NEMA configurations 5-15R).

•Models 60-2 and F60-2require a receptacle rated at 240 VAC, 15 amperes (NEMA configurations 6-15R).

All wiring must comply with local codes and ordinances.

18

Image 18

Skuttle Indoor Air Quality Products 60-2, F60-2 warranty Connecting to a Power Source

Contents

Warranty Installation Instructions Indoor Air Quality ProductsREAD AND SAVE THESE INSTRUCTIONS Operating and Maintenance InstructionsCONTRACTOR HOMEOWNERGENERAL INFO Page WARRANTY VALIDATION Skuttle Limited One-YearProduct Warranty Page How to Install a Skuttle CONTRACTORModel 60-SeriesSteam Humidifier Tools and Materials Needed CONTRACTOR Selecting a LocationMounting the Humidifier CONTRACTOR 3.Remove the templateOption B External Side Mount CONTRACTOR 5.Cut two 2 pieces of S-Cleat8 long and one 1 piece 10-1/2longOption C Duct Center Mount CONTRACTOR 5.Place the 8 long S-Cleatson the narrow sides of the opening in the duct, with the slots protruding down and out. Place the 10-1/2long S-Cleaton the longer side, closest to the center of the duct, in the same way as the shorter S-CleatsOption D Internal Side Mount 6.Adjust the water level. See #8 in “How To Maintain a Skuttle Steam Humidifier”, pg CONTRACTORConnecting to a Power Source Wiring the Air Mover CONTRACTORCAUTIONS Be careful not to activate, deactivate or alter the normal functions of the home’s heating and cooling system, except to coordinate the systems’ air moving operation with the humidifier Wiring the Fan Switch CONTRACTORPlumbing and Setting the Water Level CAUTION To prevent valve seat damage, never adjust the humidifiers water level without supporting the float arm. Make adjustments in small increments CONTRACTORPage How To Maintain a Skuttle Steam Humidifier CONTRACTORCAUTION Never oil any part of the humidifier Plumbing and Setting Water Trouble ShootingSee Plumbing and Setting Water CONTRACTORReplacement Parts CONTRACTORCONTRACTOR MODELS 60-2 AND F60-2HUMIDIFIER Maintenance RecordCLEANED HUMIDIFIERHOMEOWNER How Your Humidifier WorksHow To Extend the Life of Your Humidifier FAQs about IAQ GENERAL INFOPage Skuttle Automatic Flushing Timer The Skuttle Flushing TimerGENERAL INFO Skuttle Model 216 Make-UpAir Control Provides Year-Round,Filtered Fresh AirThe Skuttle Make-UpAir Control GENERAL INFO Skuttle High-EfficiencyAir CleanersSkuttle Air Cleaners Help Homeowners Breathe EasierHumidification The Skuttle “Happy House”Your Assurance of Enhanced IAQ FiltrationGENERAL INFO Ventilation2002 by Skuttle Mfg. Co SkuttleIndoor Air Quality Products Quality Made