Manuals / Skuttle Indoor Air Quality Products / Household Appliance / Humidifier

Skuttle Indoor Air Quality Products 60-2, F60-2 warranty Tools and Materials Needed

Models: 60-2, F60-2

1 40

Download 40 pages 55.82 Kb

Page 8

Tools and Materials Needed

Tools and Materials Needed

1.Safety goggles

2.Tin snips or aviation snips

3.Electric drill

4.3/8" and 7/64" drill bits

5.Pliers

6.Screwdriver (medium flat point and Phillips #1)

7.Level

8.Hammer

9.Small adjustable wrench

10.Center punch

11.Knife

12.Wire and hardware to connect Fan Control

13.Additional relay or fan sail switch as described under “Wiring the Air Mover”

For some installations:

14.Duct tape

15.1/4" copper water line

16.Tubing and fittings for the overflow connection

17.2 conductor low-voltage wire

8

Image 8

Skuttle Indoor Air Quality Products 60-2, F60-2 warranty Tools and Materials Needed

Contents

Indoor Air Quality Products READ AND SAVE THESE INSTRUCTIONSWarranty Installation Instructions Operating and Maintenance InstructionsGENERAL INFO CONTRACTORHOMEOWNER Page WARRANTY VALIDATION Skuttle Limited One-YearProduct Warranty Page Model 60-SeriesSteam Humidifier How to Install a SkuttleCONTRACTOR Tools and Materials Needed CONTRACTOR Selecting a LocationMounting the Humidifier CONTRACTOR 3.Remove the templateOption B External Side Mount CONTRACTOR 5.Cut two 2 pieces of S-Cleat8 long and one 1 piece 10-1/2longOption C Duct Center Mount CONTRACTOR 5.Place the 8 long S-Cleatson the narrow sides of the opening in the duct, with the slots protruding down and out. Place the 10-1/2long S-Cleaton the longer side, closest to the center of the duct, in the same way as the shorter S-CleatsOption D Internal Side Mount 6.Adjust the water level. See #8 in “How To Maintain a Skuttle Steam Humidifier”, pg CONTRACTORConnecting to a Power Source Wiring the Air Mover CONTRACTORCAUTIONS Be careful not to activate, deactivate or alter the normal functions of the home’s heating and cooling system, except to coordinate the systems’ air moving operation with the humidifier Wiring the Fan Switch CONTRACTORPlumbing and Setting the Water Level CAUTION To prevent valve seat damage, never adjust the humidifiers water level without supporting the float arm. Make adjustments in small increments CONTRACTORPage How To Maintain a Skuttle Steam Humidifier CONTRACTORCAUTION Never oil any part of the humidifier Trouble Shooting See Plumbing and Setting WaterPlumbing and Setting Water CONTRACTORReplacement Parts CONTRACTORCONTRACTOR MODELS 60-2 AND F60-2Maintenance Record CLEANEDHUMIDIFIER HUMIDIFIERHOMEOWNER How Your Humidifier WorksHow To Extend the Life of Your Humidifier FAQs about IAQ GENERAL INFOPage GENERAL INFO Skuttle Automatic Flushing TimerThe Skuttle Flushing Timer The Skuttle Make-UpAir Control Skuttle Model 216 Make-UpAir ControlProvides Year-Round,Filtered Fresh Air Skuttle High-EfficiencyAir Cleaners Skuttle Air CleanersGENERAL INFO Help Homeowners Breathe EasierThe Skuttle “Happy House” Your Assurance of Enhanced IAQHumidification FiltrationGENERAL INFO VentilationSkuttle Indoor Air Quality Products2002 by Skuttle Mfg. Co Quality Made