Slant/Fin V-180, V-33 Victory, Piping A Heating - Cooling System To A Water, Boiler And Chiller

20	VICTORY
PIPING A HEATING - COOLING SYSTEM TO A WATER	operate with chiller only, or the boiler only, being valved to the
BOILER AND CHILLER	piping system. Separate control devices on the boiler and
	chiller may be used, or a single set of air and pressure con-
Figure below illustrates a method of piping a heating-cooling	trols on the common piping may be preferred.
system to a water boiler and a chiller. Hand valves (shown) or
automatic valves must be installed to prevent circulation of	If the boiler is used to supply hot water to heating coils in air
chilled water in the boiler or hot water in the chiller.	handling units, flow control valves or other devices must be
	installed to prevent gravity circulation of water in the coils dur-
The air control system and pressure control system must	ing the cooling cycle.

IF REPLACEMENT PARTS ARE NEEDED	and parts may be obtained locally. All other controls and parts
	should be identified by and ordered from Slant/Fin. Relief/Safety
When parts are needed, refer to boiler model and serial number	valves must be ASME rated for the pressure and gross output of
shown on the boiler name/rating plate. Refer to publication num-	the boiler.
ber V-10PL Victory Replacement Parts for part numbers. When-
ever possible refer to the original order by number	Replacement parts are available from:
and date.
	Slant/Fin Corp.
Control identification and replacement should not be attempted	100 Forest Drive
by unskilled personnel. Only simple, easily-identified controls	Greenvale, NY 11548

SLANT/FIN CORPORATION, Greenvale, N.Y. 11548 • Phone: (516) 484-2600 FAX: (516) 484-5921• Canada: Slant/Fin LTD/LTEE, Mississauga,www.slantfinOntar.comio