Console Specifications
CS – 0206VLII
4/4/2006
Page 4 of 7
Frames are designed to allow for mounting of accessories such as Flat
Panel Monitor mounts utilizing slat wall that can be used along with
monitor mounting on work surfaces. The frames are designed to allow for
other accessories such as shelving, white boards, light mounts, and desk
top management storage products.
All frame modules are equipped with leveling feet to insure uniformity and
tight fit.
6.2 Storage -
A storage area is provided below the work surface that allows for a
number of different storage accessories. These accessories are to
be CPU Storage Swing Out doors and/ or CPU Storage Cabinets
for CPU storage with ventilation and access. The storage cabinets
should also allow for rack mount capability if required without
modification to the cabinet.
6.3 Monitor Mounts –
With the advances in the Flat Panel mount, the console shall
provide means of supporting both CRT and/or Flat Panel monitors,
either with optional monitor mounts or a means of supporting
monitors on the work surface.
The mounts shall be of such construction to be able to support
monitors based on user requirements such as size and weight.
Slat Wall mounted flat panel mounts shall be of a design allows for
vertical height adjustment and horizontal adjustment utilizing Slat
Wall design.
6.4 Cable Management and Utility Power –
Cable management shall be provided in all consoles with access
available to the user from either the front or rear of the console. The
cable management shall allow for separation of
Data/Communications cables from Power runs. The cable
management shall be designed to fit into troughs that will allow
unobstructed paths throughout the console. Front access for these
troughs is available from lift off doors that allow access to jacks and
power strip outlets. Rear access is available with the hinged doors
and a trough at the top of the frame is accessible via the removable
(free from use of tools) top cap.