Console Specifications
CS – 0206VLII
4/4/2006
Page 3 of 7
4) Modular Pre-Engineered Construction
All components within the system shall be:
4.1 Of a pre-engineered modular construction, i.e.: constructed from a
series of independent sectional compartments.
4.2 Available from a pre-defined set of manufacturer’s model numbers.
4.3 Free from alterations to the design either prior to or following
installation, will be accomplished without the need for either welding or
carpentry work.
4.4 Capable of cables or conduits passing through the complete width of
the system without obstruction.
4.5 Constructed of a steel superstructure framework with external
decorative laminated panels.
5) Self-Supporting Skeleton Framework
The self-supporting skeleton framework shall:
5.1 Be installed onto the site in advance of any external finishing panels.
The framework shall be fully capable of supporting all specified electronics
without the need for attachment of any external panels.
5.2 Include modular sections and be constructed of 14 and 16 Ga.* (.074"
and .059") sheet metal. Console sections shall be secured together by use
of #1/4-20 bolts. All welds exposed to the front shall be filed smooth and
sharp contours eliminated.
6) Components
6.1 Frames –
Design is open architecture style consisting of framework in 14 Ga. cold
rolled steel materials to provide durability, strength, modularity and
complete cable run flexibility.
Frames are modular in design that comes in different frame widths (24”,
30”, 36”, 48”, 60” and 72”) that are standard. There are 90-degree corners
along with wedge designs that allow for Convex and Concave layouts
(they are to be available in 30, 45 and 60-degrees). Standard height of
the console is 43”.