SMC Networks SMC7004VBR V.2 Troubleshooting, Verify you are connected to the Barricade Router

TROUBLESHOOTING

The information outlined in this section describes some useful steps for getting your computer and Barricade™ router online.

Verify you are connected to the Barricade™ Router

If you are unable to access the Barricade™'s web-based administration pages, then you may not be properly connected or configured. The screen shots in this section were taken on a Windows 2000 machine, but the same steps will apply to Windows 95/98/Me/XP.

To determine your TCP/IP configuration status, please follow the steps below:

1.Click [Start] then choose [Run].

2.Type cmd or command to open a DOS prompt.

3.In the DOS window, type ipconfig and verify the information that is displayed.

4.If your computer is setup for DHCP, then your TCP/IP configuration should be similar to the information displayed:

•[IP Address]: 192.168.2.X

(x is number between 100 and 199)

•

•

[Subnet]: 255.255.255.0

[Gateway]: 192.168.2.1

47