Getting to Know the Barricade™
LED Indicators
The Barricade™ includes LED indicators on the front panel that simplify installation and network troubleshooting.
LED | ON | OFF | FLASHING |
|
|
|
|
PWR | Receiving power | Not receiving power | N/A |
|
|
|
|
WAN | Good WAN | No WAN connection | Transmitting or |
| connection detected | detected | receiving traffic |
|
|
|
|
LINK/ACT | Good LAN | No LAN connection | Transmitting or |
| connection detected | detected | receiving traffic |
|
|
|
|
10/100 Mbps | LAN port operating | LAN port operating | N/A |
| at 100 Mbps | at 10 Mbps |
|
|
|
|
|
Resetting the Barricade™
The [Reset] button is located on the rear panel of the Barricade™ Broadband Router. Use a paper clip or a pencil tip to push the Reset button.
Reset
If the Router is having problems connecting to the Internet, simply unplug the router for 3 seconds then plug back in.
Restore Factory Defaults
If resetting the router does not resolve your issue, then you can follow these steps:
1.Leave power plugged into the router.
2.Locate the [Reset] button on the back panel, press and hold until WAN LED flashes off.
3.Release [Reset] button.
6
