SMC Networks SMC7004VWBR V.2 manual System Requirements, Description

Installing the Wireless Barricade Router

Item	Description
Reset	Use this button to reset the power and restore the default factory
Button	settings.
LAN	Fast Ethernet ports (RJ-45). Connect devices (such as a PC, hub
Ports	or switch) on your local area network to these ports.
WAN	WAN port (RJ-45). Connect your cable modem, DSL modem, or an
Port	Ethernet router to this port.
Power	Connect the included power adapter to this inlet.
Inlet	Warning: Using the wrong type of power adapter may cause
	damage.
LEDs	Power, WAN and LAN port status indicators.
	(See “LED Indicators” on page 3.)

System Requirements

You must have an ISP that meets the following minimum requirements:

•

•

•

•

•

Internet access from your local telephone company or Internet Service Provider (ISP) using a DSL modem or cable modem.

A PC using a fixed IP address or dynamic IP address assigned via DHCP, as well as a gateway server address and DNS server address from your service provider.

A computer equipped with a 10 Mbps, 100 Mbps, or 10/100 Mbps Fast Ethernet card, or a USB-to-Ethernet converter.

TCP/IP network protocol installed on each PC that needs to access the Internet.

A Java-enabled Web browser, such as Microsoft Internet Explorer 5.0 or above, or Netscape Communicator 4.0 or above installed on one PC at your site for configuring the Wireless Barricade.

8