Configuring Client TCP/IP
3.Locate and
4.In the Local Area Connection Properties box, verify the box next to Internet Protocol (TCP/IP) is
checked. Then highlight the Internet Protocol (TCP/IP), and click the Properties button.
5.Select “Obtain an IP address automatically” to configure your computer for DHCP. Click the [OK] button to save this change and close the Properties window.
6.Click the OK button again to save these new changes.
7.Reboot your PC.
8.To obtain new network settings see “Obtain IP Settings from Your Wireless Barricade Router” on page 18.
Configuring Your Computer in Windows XP
The following instructions assume you are running Windows XP with the default interface. If you are using the Classic interface (where the icons and menus look like previous Windows versions), please follow the instructions for Windows 2000 outlined above.
1.Access your Network settings by clicking Start, choose Control Panel, select Network and Internet Connections and then click on the Network Connections icon.
22
