CONNECTING TO A POWER SOURCE
Connecting AC Power
When a universal AC power module is installed in the switch, external AC power must be supplied to the module.
To connect the switch to a power source:
1.First verify that the external AC power supply can provide 100 to 240 VAC,
2.Plug the power cable into a grounded,
Note: For international use, you may need to change the AC line cord. You must use a line cord set that has been approved for the receptacle type in your country.
3.Insert the plug on the other end of the power cable directly into the receptacle on the AC power module.
Figure 3-8 AC Power Receptacle
4.Check the indicators on the power module as the switch is powered on to verify that the AC LED indicating external power status is on, and that the +12V LED indicating internal power conversion is on. If not, recheck the power supply and power cable connections at the supply source and at power module.
