SMC Networks SMC7824M/FSW manual 2 Network Wiring Connections

TWISTED-PAIR DEVICES

Network Wiring Connections

Today, the punch-down block is an integral part of many of the newer equipment racks. It is actually part of the patch panel. Instructions for making connections in the wiring closet with this type of equipment follows.

1.Attach one end of a patch cable to an available port on the switch, and the other end to the patch panel.

2.If not already in place, attach one end of a cable segment to the back of the patch panel where the punch-down block is located, and the other end to a modular wall outlet.

3.Label the cables to simplify future troubleshooting. See “Cable Labeling and Connection Records” on page 4-9.

Network Switch

Patch Panel

Equipment Rack (side view)

Punch-Down Block

Wall

Figure 4-2 Network Wiring Connections

4-3