SMC Networks SMC790WBRA4 manual Wlan

Field

Refresh

Close

Description

the assigned IP addresses before the IP addresses change.

Refresh the page.

Close the page.

Click MAC-based Assignment in the DHCP Server Setup page. The page shown in the following figure appears. In this page, you can assign the IP addresses on the LAN to the specific individual PCs based on their MAC address.

The following table describes the parameters and buttons of this page.

Field	Description
Host MAC Address	Enter the MAC address of a PC on the LAN.
Assigned IP Address	It specifies the IP address of the IP address pool.
Assign IP	After entering the host MAC address and assigned IP address, click it. A row will
	be added in the MAC-base assignment table.
Modify Assigned IP	Select a row in the MAC-base assignment table. The MAC address and IP
	address appear. After modifying the MAC address and IP address, click it to save
	the settings.
Delete Assigned IP	Select a row in the MAC-base assignment table, then click it, this row is deleted.
Close	Close the page.
MAC-based Assignment Table	It shows the assigned IP address based on the MAC address.

3.5 WLAN

In the navigation bar, choose WLAN. The WLAN page that is displayed contains Basic Settings, Security, Advance Settings, Access Control, and WDS Settings. This page introduces the wireless LAN and some basic configurations. Wireless LANs can be as simple as two computers with wireless LAN cards communicating in a pear-to-pear network or as complex as a number of computers with wireless LAN cards communicating through access points which bridge network traffic to wired LAN.

24