SMC Networks SMC790WBRA4 manual Front panel, Rear panel

Front panel

The following table describes the LEDs of the device.

LED	Status	Color	Description
	On		The device is powered on and the initialization is normal.
		Green
	Off		The device is powered off.
Power
	On		The device is initializing.
		Red
	Blinks		The firmware is upgrading.
	On		The Internet connection is normal.
Link		Blue
	Blinks		Data is being transmitted on the Internet.
	Off		The Internet connection is failed.
	On		The WLAN connection is established.
WLAN		Green
	Blinks		Data is being transmitted through the WLAN interface.
	Off		The WLAN connection is failed.
	On		The LAN connection is normal and active.
LAN4/LAN3/LAN2		Green
	Blinks		Data is being transmitted through the Ethernet interface.
/LAN1
	Off		The LAN connection is failed.

Rear panel

The following table describes the interfaces of the device.

Interface	Function
	Power switch, power on or power off the device.
	Resets to the factory defaults. To restore factory defaults, keep the device powered on and
Reset
	push a paper clip into the hole. Press down the button over 5 seconds, then release.
Power	Power interface, for connecting to the power adapter of 12 V DC, 1 A.
LAN1/LAN2/LAN3	RJ-45 interface, for connecting to the Ethernet interface of the PC or the Ethenet devices with
/LAN4	the cable.
	RJ-11 interface, for connecting to the ADSL interface or a splitter through the telephone
Line
	cable.
	2