Refresh Refresh the system shown in the page.
Time Mode
You can choose Time Server or Manual.
Select Time Server, the router gets the system time from the time server.
Select Manual, you should configure the system time manually.
Enable SNTP Client Update Select it, you can choose the correct SNTP server which you want.
SNTP Server Choose the SNTP server from the drop-down list box.
Time Zone Select the time zone in which area you are.
3.8.7 System Log
Choose Admin > System Log. The page shown in the following figure appears. In this page, you can enable or
disable the system log function. You can also view the system log.
The following table describes the parameters and buttons of this page.
Field Description
System Log You can enable or disable the system log function.
Apply Changes Save the settings of this page.
Refresh Refresh the system log shown in the textfield.
3.8.8 SNMP
Choose Admin > SNMP. The page shown in the following figure appears. In this page, you can set the SNMP
parameters.
52