The following table describes the parameters of this page.
| Field |
| Description |
|
|
|
| This table shows the existed PVCs. It shows the Interface name, channel mode, | |
| Current ATM VC Table |
| VPI/VCI, encapsulation mode, local IP address, remote IP address and other | |
|
|
| information. The maximum item of this table is eight. | |
|
|
| ||
|
| Click it, the IP | ||
|
| parameters. | ||
|
|
|
| |
| VPI |
| The virtual path between two points in an ATM network, ranging from 0 to | |
| 255. |
| ||
|
|
| ||
|
|
|
| |
| VCI |
| The virtual channel between two points in an ATM network, ranging from 32 | |
|
| to 65535 (1 to 31 are reserved for known protocols) | ||
|
|
| ||
|
|
|
| |
| Encapsulation |
| You can choose LLC and | |
|
|
|
| |
| Channel Mode |
| You can choose 1483 Bridged, 1483 MER, PPPoE, PPPoA, or 1483 Routed. | |
|
|
|
| |
| Admin Status |
| Select Disable, this PVC is unusable. | |
|
|
|
| |
|
|
| Select it to enable the NAPT function of the router. If you do not select it and | |
| Enable NAPT |
| you want to access the Internet normally, you must add a router on the uplink | |
|
| equipment. Otherwise, the access to the Internet fails. Normally, it is required | ||
|
|
| ||
|
|
| to enable NAPT. | |
|
|
|
| |
| Login Name |
| The correct user name that your ISP has provided to you. | |
|
|
|
| |
| Password |
| The correct password that your ISP has provided to you. | |
|
|
|
| |
| Connection Type |
| You can choose Continuous, Connect on Demand, or Manual. | |
|
|
|
| |
|
|
| If select connect on demand, you need to enter the idle timeout time. Within | |
| Idle Time(min) |
| the preset minutes, if the router does not detect the flow of the user | |
|
|
| continuously, the router automatically disconnects the PPPoE connection. | |
|
|
|
|
|
| WAN IP Settings |
|
|
|
|
|
|
| |
|
|
| You can choose Fixed IP or Use DHCP. | |
| Type |
| If select Fixed IP, you should enter the local IP address, remote IP address | |
|
|
| and subnet mask. | |
|
|
|
| |
|
| 32 |
| |
