SMC Networks SMC8014 manual B.3 I have another IP Address displayed

Confirm that you have a good link light on the Gateway’s port to which this computer is connected. If not, please try another cable.

If you have a good link light, please open up a DOS window as described in section A.1 and type “ipconfig /renew” (without the quotes)

If you are still unable to get an IP Address from the Gateway, reinstall your network adapter. If anti-virus software is running on your computer, disable it before reinstalling the network adapter. Please refer to your adapter manual for instructions.

B.3 I have another IP Address displayed

If you have another IP address listed, then the PC may not be configured for a DHCP connection. Please refer to Chapter 4 Configure your Computer for information.

Once you have confirmed your computer is configured for DHCP, follow the steps below.

1.Open a DOS window as described above.

2.Type “ipconfig /release” (without the quotes)

3. Then type “ipconfig /renew” (without the quotes)

Once you are able to get a valid IP address from the Gateway, you can now access the web- based Administration pages.

If you still are not getting an IP address from the Gateway, please reset the hardware as outlined in Chapter 2 and follow the steps outlined in this appendix again. Note: all configured

- 27 -