Desktop or Shelf Mounting | SMC Networks SMC8126PL2-F instruction

3 Installing the Switch

2.Mount the device in the rack, using four rack-mounting screws (not provided).

Figure 3-3 Installing the Switch in a Rack

3.If installing a single switch only, turn to "Connecting to a Power Source" at the end of this chapter.

4.If installing multiple switches, mount them in the rack, one below the other, in any order.

Desktop or Shelf Mounting

1.Attach the four adhesive feet to the bottom of the first switch.

Figure 3-4 Attaching the Adhesive Feet

2.Set the device on a flat surface near an AC power source, making sure there are at least two inches of space on all sides for proper air flow.

3-4

Image 36

SMC Networks SMC8126PL2-F manual Desktop or Shelf Mounting, Installing the Switch in a Rack

Contents

Installation Guide TigerSwitch 10/100/1000 Installation Guide Page Warranty and Product Registration Compliances and Safety Warnings CE Mark Declaration of Conformance for EMI and Safety EEC Safety Compliance France and Peru only France et Pérou uniquement Francia y Perú únicamente Vii Advertencias y mensajes de precaución Purpose Page Contents Appendix a Troubleshooting Contents Tables Figures Xvi Front Panel Switch Architecture Power-over-Ethernet CapabilityNetwork Management Options Description of Hardware 10/100/1000BASE-T PortsSFP Slots Port and System Status LEDs LED Mode PoE/Link Button Optional Redundant Power UnitPower Supply Socket Features and Benefits ConnectivityExpandability Performance Introduction to Switching Network Planning Application Examples Collapsed Backbone Network Aggregation Plan Network Aggregation Plan Remote Connections with Fiber Cable Remote Connections with Fiber Cable Making Vlan Connections Making Vlan Connections Application Notes Installing the Switch Selecting a SiteEthernet Cabling Equipment Checklist Package ContentsOptional Rack-Mounting Equipment Mounting Rack Mounting Installing the Switch in a Rack Desktop or Shelf Mounting Installing an Optional SFP Transceiver Inserting an SFP Transceiver into a Slot Connecting to a Power Source Connecting to the Console Port Wiring Map for Serial Cable Serial Cable Wiring Switch’s 8-Pin Null Modem PC’s 9-Pin Installing the Switch Connecting Network Devices Making Network ConnectionsTwisted-Pair Devices Cabling Guidelines Connecting to PCs, Servers, Hubs and Switches Network Wiring Connections Network Wiring Connections Fiber Optic SFP Devices Connectivity Rules Making Connections to SFP Transceivers 1000BASE-T Cable Requirements Mbps Gigabit Ethernet Collision DomainMbps Fast Ethernet Collision Domain Cable Labeling and Connection Records Mbps Ethernet Collision Domain Appendix a Troubleshooting Diagnosing Switch IndicatorsPower and Cooling Problems Installation In-Band Access Appendix B Cables Twisted-Pair Cable and Pin Assignments10BASE-T/100BASE-TX Pin Assignments Straight-Through Wiring Crossover Wiring 1000BASE-T Pin Assignments Twisted-Pair Cable and Pin Assignments B Cable Testing for Existing Category 5 Cable Adjusting Existing Category 5 Cabling to Run 1000BASE-TFiber Standards Dispersion-Shifted Fiber Cables Appendix C Specifications Physical Characteristics Switch Features Management Features Standards Compliances Specifications Appendix D Ordering Information Ordering Information Glossary 10BASE-T CSMA/CD LED UTP Index Numerics Index-2 Page 150200000032A R01