StatusWireless, Rate, Signal | SMC Networks SMCWBR14-N2 specification

Status_Wireless

The wireless section allows you to view the wireless clients that are connected to your wireless router.

MAC Address

The Ethernet ID (MAC address) of the wireless client.

IP Address

The LAN-side IP address of the client.

Mode

The transmission standard being used by the client. Values are 11a, 11b, or 11g for 802.11a, 802.11b, or 802.11g respectively.

Rate

The actual transmission rate of the client in megabits per second.

Signal

This is a relative measure of signal quality. The value is expressed as a percentage of theoretical best quality. Signal quality can be reduced by distance, by interference from other radio-frequency sources (such as cordless telephones or neighboring wireless networks), and by obstacles between the router and the wireless device.

Page 77

Image 77

SMC Networks SMCWBR14-N2 manual StatusWireless, Rate, Signal

Contents

User Guide Limited Warranty Page Important Note CE Mark Declaration of Conformance for EMI and Safety EECFCC Radiation Exposure Statement Iii Table of Contents SMCWBR14-N2 Package Contents AD-HOCIBSS Network Wireless LAN Networking Channel for each station Page Roaming in an ESS network diagram Introduction Hardware Overview Front Panel LED’s Getting Started ¾ Click Log Using the Configuration Menu BasicInternet Basic BasicWireless Wireless Network Name Enable WirelessEnable Auto Channel Scan Wireless Channel Example WEPWPA-Personal and WPA-Enterprise WPA-Personal Advanced Optional Backup Radius Server BasicNetwork Settings Enable RIP Router SettingsRIP Operating mode IP Address Allow RIP updates from WAN Act as default routerRIP Password Dhcp Server Settings Always Broadcast Dhcp Lease TimeAdd/Edit Dhcp Reservation Computer Name Number of Dynamic Dhcp Clients Dhcp Reservations ListRevoke Reserve AdvancedVirtual Server Advanced Protocol Virtual Server Parameters NamePrivate Port Public Port Schedule EnableAdd/Edit Virtual Server Save Application AdvancedSpecial ApplicationsParameters for an Application Rule Example Trigger Protocol Trigger Port RangeInput Port Range Input Protocol AdvancedGaming TCP Ports To Open Port Forwarding Fields NameUDP Ports To Open Edit/Add Game Rule AdvancedStreamEngine StreamEngine Setup Enable StreamEngine Dynamic Fragmentation Automatic ClassificationAutomatic Uplink Speed Measured Uplink Speed Priority Add/Edit StreamEngine Rule EnableSource IP Range Source Port Range Add/Edit Route AdvancedRouting Routes List Add Policy AdvancedAccess ControlPolicy Wizard Policy Table Add/Edit Web Site AdvancedWEB FilterWeb Filter Parameters Web Site Allowed Web Site List Filter Settings Mode Enable MAC Address FilterFilter Wireless Clients AdvancedMAC Address Filter MAC Address List Filter Wired ClientsAdd/Edit MAC Address AdvancedFirewall NAT Endpoint Filtering Firewall Settings Enable SPIEndpoint Independent Address Restricted DMZ IP Address Enable DMZDMZ Host Rtsp Pptp Netmeeting FTPSIP Wake-On-LAN AdvancedInbound Filter Action Add/Edit Inbound Filter RuleInbound Filter Rules List Allow All AdvancedAdvanced Wireless WMM Enable 802.11d EnableExtra Wireless Protection WDS Enable Enable WAN Ping Respond Enable UPnPAdvancedNetwork UPnP AdvancedWISH Enable Multicast StreamsWAN Port Speed Multicast Streams Http Wish Host 1 IP Range Save/UpdateHost 1 Port Range Host 2 IP Range Wi-Fi Protected Setup Enable AdvancedWi-Fi Protected SetupLock Wireless Security Settings PIN Settings Add Wireless Device Wizard Reset PIN to DefaultCurrent PIN Generate New PIN Tools ToolsAdmin User Password Admin PasswordEnable Remote Management Remote Admin Port Enable Daylight Saving Time Configuration Current Router TimeToolsTime Time Zone Daylight Saving Offset Automatic Time Configuration Enable NTP ServerDST Start and DST End NTP Server Used Syslog Server IP Address Enable Logging to Syslog ServerToolsSyslog ToolsEmail Settings On Schedule Verify PasswordEmail Log When Full or on Schedule On Log Full Load Settings From Local Hard Drive Save Settings To Local Hard DriveRestore To Factory Default Settings Reboot The Device ToolsFirmware Firmware UpgradeFirmware Information Check Online Upload ToolsDynamic DNS Timeout ToolsSystem Check ToolsSchedules Schedule Rules List Statistics and Active Sessions StatusDevice info PPPoE, PPTP, L2TP Connection Dhcp ConnectionBigPond Connection LAN Computers Rate StatusWirelessSignal StatusRouting StatusLogs Apply Log Settings NowWhat to View View Levels Save Log RefreshEmail Now StatusStatistics Internal StatusActive SessionsExternal NAT Dir StatusWISH SessionsOut Time Out Target Originator Established or closing TCP connections Ascii Adsl Bootp CAT DMZ Dhcp EAP DNSDSL GUI Icmp HttpsIeee Igmp ISP IPX LED LANLPR/LPD L2TP MIB MdixMppe MTU NTP NICOfdm OSI RIP PPPRadius Smtp RSASnmp Soho TCP SsidTCP/IP Tftp USB URLUTP Vlan Wisp WDSWlan WPA 802.11 Yagi antenna Technical Support