StatusStatistics | SMC Networks SMCWBR14-N2 instruction

Status_Statistics

The Statistics page displays all of the LAN, WAN, and Wireless packet transmit and receive statistics.

Sent

The number of packets sent from the router.

Received

The number of packets received by the router.

TX Packets Dropped

The number of packets that were dropped while being sent, due to errors, collisions, or router resource limitations.

RX Packets Dropped

The number of packets that were dropped while being received, due to errors, collisions, or router resource limitations.

Collisions

The number of packets that were dropped due to Ethernet collisions (two or more devices attempting to use an Ethernet circuit at the same time).

Errors

The number of transmission failures that cause loss of a packet. A noisy radio-frequency environment can cause a high error rate on the wireless LAN.

Page 81

Image 81

SMC Networks SMCWBR14-N2 manual StatusStatistics

Contents

User Guide Limited Warranty Page Important Note CE Mark Declaration of Conformance for EMI and Safety EECFCC Radiation Exposure Statement Iii Table of Contents SMCWBR14-N2 Package Contents AD-HOCIBSS Network Wireless LAN Networking Channel for each station Page Roaming in an ESS network diagram Introduction Hardware Overview Front Panel LED’s Getting Started ¾ Click Log Using the Configuration Menu BasicInternet Basic BasicWireless Wireless Network Name Enable WirelessEnable Auto Channel Scan Wireless Channel Example WEPWPA-Personal and WPA-Enterprise WPA-Personal Advanced Optional Backup Radius Server BasicNetwork Settings Enable RIP Router SettingsRIP Operating mode IP Address Allow RIP updates from WAN Act as default routerRIP Password Dhcp Server Settings Always Broadcast Dhcp Lease TimeAdd/Edit Dhcp Reservation Computer Name Number of Dynamic Dhcp Clients Dhcp Reservations ListRevoke Reserve AdvancedVirtual Server Advanced Protocol Virtual Server Parameters NamePrivate Port Public Port Schedule EnableAdd/Edit Virtual Server Save AdvancedSpecial Applications Parameters for an Application Rule ExampleApplication Trigger Protocol Trigger Port RangeInput Port Range Input Protocol AdvancedGaming TCP Ports To Open Port Forwarding Fields NameUDP Ports To Open Edit/Add Game Rule AdvancedStreamEngine StreamEngine Setup Enable StreamEngine Dynamic Fragmentation Automatic ClassificationAutomatic Uplink Speed Measured Uplink Speed Priority Add/Edit StreamEngine Rule EnableSource IP Range Source Port Range Add/Edit Route AdvancedRouting Routes List AdvancedAccess Control Policy WizardAdd Policy Policy Table AdvancedWEB Filter Web Filter Parameters Web SiteAdd/Edit Web Site Allowed Web Site List Filter Settings Mode Enable MAC Address FilterFilter Wireless Clients AdvancedMAC Address Filter Filter Wired Clients Add/Edit MAC AddressMAC Address List AdvancedFirewall NAT Endpoint Filtering Firewall Settings Enable SPIEndpoint Independent Address Restricted Enable DMZ DMZ HostDMZ IP Address Rtsp Pptp Netmeeting FTPSIP Wake-On-LAN AdvancedInbound Filter Action Add/Edit Inbound Filter RuleInbound Filter Rules List Allow All AdvancedAdvanced Wireless WMM Enable 802.11d EnableExtra Wireless Protection WDS Enable Enable WAN Ping Respond Enable UPnPAdvancedNetwork UPnP AdvancedWISH Enable Multicast StreamsWAN Port Speed Multicast Streams Http Wish Host 1 IP Range Save/UpdateHost 1 Port Range Host 2 IP Range Wi-Fi Protected Setup Enable AdvancedWi-Fi Protected SetupLock Wireless Security Settings PIN Settings Add Wireless Device Wizard Reset PIN to DefaultCurrent PIN Generate New PIN Tools ToolsAdmin User Password Admin PasswordEnable Remote Management Remote Admin Port Enable Daylight Saving Time Configuration Current Router TimeToolsTime Time Zone Daylight Saving Offset Automatic Time Configuration Enable NTP ServerDST Start and DST End NTP Server Used Enable Logging to Syslog Server ToolsSyslogSyslog Server IP Address ToolsEmail Settings Verify Password Email Log When Full or on Schedule On Log FullOn Schedule Load Settings From Local Hard Drive Save Settings To Local Hard DriveRestore To Factory Default Settings Reboot The Device ToolsFirmware Firmware UpgradeFirmware Information Check Online Upload ToolsDynamic DNS Timeout ToolsSystem Check ToolsSchedules Schedule Rules List Statistics and Active Sessions StatusDevice info PPPoE, PPTP, L2TP Connection Dhcp ConnectionBigPond Connection LAN Computers StatusWireless SignalRate StatusRouting StatusLogs Apply Log Settings NowWhat to View View Levels Refresh Email NowSave Log StatusStatistics Internal StatusActive SessionsExternal NAT Dir StatusWISH SessionsOut Time Out Target Originator Established or closing TCP connections Ascii Adsl Bootp CAT DMZ Dhcp DNS DSLEAP GUI Icmp HttpsIeee Igmp ISP IPX LED LANLPR/LPD L2TP MIB MdixMppe MTU NTP NICOfdm OSI PPP RadiusRIP Smtp RSASnmp Soho TCP SsidTCP/IP Tftp USB URLUTP Vlan Wisp WDSWlan WPA 802.11 Yagi antenna Technical Support